
Atomy EP Skin Booster
Handheld skincare device for absorption
- Size
- 1 device (146 g; 42.3 x 43.92 x 183.83 mm)
- Product code
- B00791 (UK mall)
The Atomy EP Skin Booster is a rechargeable handheld skincare device, not a cosmetic. You apply your skincare first, usually an Atomy ampoule. Then you move the metal head over your face. The device uses electroporation pulses, and Atomy says these help cosmetic ingredients absorb. It has four modes. Blue is general absorption with heat, for 5 minutes. White is for brightening products, with heat, for 2 minutes. Purple is massage with vibration, for 2 minutes. Red is heat only, around 40 °C, for 5 minutes. There are three intensity levels, and it switches off automatically at the end of each mode. It charges by USB-C in about 2 hours, and Atomy rates a full charge at about 20 five-minute sessions. The box contains the device, a pouch, a USB-C cable and a manual. Atomy states that it is not a medical device. It is listed in Korea, the UK, Australia, Singapore and a few other countries, but not on the EU mall.
Where to buy
Only on Atomy’s official mall in your country, at member prices. Registration is free, with no fees and no obligation to buy. Ranges and prices differ by country.
Where it is listed
This product code is listed on 7 of the 26 Atomy country malls we checked. It can also be sold in another size or under another code, so check your country’s mall before you order.
Checked on 5 November 2026. Links open the product on that country’s official Atomy mall.
Key features
- Electroporation (EP) skincare device, model ASB-KR21EP
- Four modes: Blue (absorption + heat, 5 min), White (brightening products + heat, 2 min), Purple (vibration massage, 2 min), Red (heat about 40 °C, 5 min)
- Three intensity levels with LED display; auto power-off at the end of each mode
- Built-in 3.7 V 1,200 mAh battery; USB-C charging in about 2 hours; about 20 five-minute sessions per charge
- Thermistor and bimetal sensor for temperature safety, as described by Atomy
- In the box: device, pouch, USB-C charging cable, manual
How to use
- 1Charge the device fully before first use, using the supplied USB-C cable (5 V, 1 A).
- 2Apply a generous amount of ampoule or another skincare product to your face.
- 3Hold the power button to switch on, then press it briefly to choose the intensity. Hold the side of the device so it starts working.
- 4Choose a mode and glide the head over the skin. It stops automatically after 2 or 5 minutes, depending on the mode.
- 5Wipe the skin-contact area clean after each use.
Good for
- Adults who already use an ampoule or serum routine
- Using with a sheet mask (move the device over the mask)
- People who like a short at-home massage step
Ingredients
Not applicable (electronic device). Use with a skincare product applied first; Atomy recommends an Atomy ampoule.
Questions
How does the Atomy EP Skin Booster work?
It uses electroporation, which means short electrical pulses applied through the metal head. Atomy says these temporarily open pathways in the outer skin layer so skincare can absorb better. You always apply a product first and then glide the device over it. Some modes add gentle heat around 40 °C or vibration. Atomy states that it is a skincare device, not a medical device.
What do the four modes on the EP Skin Booster do?
Blue is for general absorption of skincare, with heat, for 5 minutes. White is meant for brightening products, also with heat, for 2 minutes. Purple adds vibration massage for absorption and a firmer feel, for 2 minutes. Red is heat only, around 40 °C, for 5 minutes. Each mode turns off by itself when its time ends.
Which products should I use with the EP Skin Booster?
Atomy recommends applying a generous amount of an Atomy ampoule first. The device can also be used over a sheet mask by moving it gently on top of the mask. Gel-type sheet masks may block the pulses, so they may not work as well. Atomy warns that other cosmetics may discolour or deform the device.
Who should not use the EP Skin Booster?
Atomy lists many exclusions. These include children and teenagers under 18, pregnant women and people with pacemakers or other implanted electrical devices. They also include people with epilepsy, heart conditions or skin cancer, people on steroid medication, and anyone with sensitive skin, wounds or a recent cosmetic procedure. Read the full list in the manual before use.
How long does the battery last on the EP Skin Booster?
Atomy rates a full charge at about 20 sessions, based on one five-minute session a day. Charging takes about 2 hours with a 5 V, 1 A USB-C supply. The device does not work while charging. When the battery is empty, the rear LED flashes red. Charge it regularly rather than running it flat each time.
Good to know
- Do not use it if you are under 18 or pregnant, have a pacemaker or other implanted electrical device, or have epilepsy or a heart condition. The full list of exclusions is in the manual.
- Do not use it across the eyelids or lips, or on the centre of the neck or the carotid area. Do not use it on wounds, freshly shaved or waxed skin, or within two weeks of a cosmetic procedure.
- Start at the lowest level. Stop if your skin becomes red or itchy, and do not stay on one spot too long.
- It is not waterproof. Do not use it in the bath or in humid places, and remove metal jewellery before use.
Storage
- Switch it off and unplug it after charging. Keep it away from heat, water, sealed cars and children.
- Clean it with a tissue or soft cloth, never under running water or with alcohol or solvents.
You may also like
Related guides
Where does this fit in a routine?
Answer six questions and get a morning and evening routine from the Atomy products sold in your country.
Follow the label of the product sold in your country. Product photos © Atomy.
Disclosure: AtomyHealth is run by an independent, registered Atomy distributor. If you register through our links, we may earn a commission. Prices are the same. General information, not medical advice.



